 |
ADB-1: Single Channel Active Direct Box
The ADB-1 allows a Hi-Z unbalanced source to directly feed to Lo-Z balanced input. Musical instruments, tape recorders, VCRs and sound projectors can be run "direct" to the mixing console, avoiding unnecessary degradation of sound quality. The ADB-1 operates on either phantom power or a 9-volt battery. Features: flat response, low distortion, low noise, wide dynamic range (input will handle up to 6v P-P in instrument position; up to 400w RMS in speaker position when used in parallel with an amplifier load), no transformer, RF protection on input and output, switch able ground isolation, flush mounted slide switches minimize accidental switching and resist breakage, switches and markings on top of unit, full two-year warranty, designed and manufactured in the USA. |
 |
ADB-4: Channel Active Direct Box w/PS-1
Four channel active direct box from Stewart Audio. It features an XLR output on all four channels, with a +4 dB or -30 dB input level switch. The rear panel also has an additional input or link 1/4" connector, with a -20 or +20 dB level sensitivity selector switch and a two-position ground lift switch on each of the channels. For live performance and studio use. |
 |
BPS-1: Single 48v Phantom Supply Battery Powered
Battery-Powered Phantom Power Supply for Condenser Mics The BPS-1 is a battery powered, +48v phantom power supply designed for applications where AC powered units would not be practical. |
 |
PM-1: Single 48v Phantom Supply Module w/PS-1 3 lbs
The Stewart PM1 provides the most consistent excellence of all phantom power supplies. The Stewart PM1 power supply system delivers a true +48V to microphones, direct boxes or any other devices requiring phantom power. Delivers up to 10mADC per channel and features individual regulation and short circuit protection for each channel, very low noise and crosstalk and isolated outputs which protect other equipment. Provides 450mA at 24VAC from a 120VAC line, includes a PS1 Power Supply. Single 40V module with PS-1; 3 lbs. |
 |
PM-2: Dual 48v Phantom Supply Module w/PS-1
Stewart PM-2 units have provided the most consistent excellence of all phantom power supplies. These power supply systems deliver a true +48V to microphones, direct boxes or any other devices requiring phantom power. The PM-2 delivers up to 10mADC per channel and features individual regulation and short circuit protection for each channel, very low noise and crosstalk and isolated outputs which protect other equipment. |
 |
PM-4: Quad 48v Phantom Supply Module w/PS-1
Phantom Power Supply with 4-Microphone Capacity The PM-4 power supply system delivers a true +48V to up to 4 microphones, direct boxes or any other devices requiring phantom power. It provides up to 10mA DC per channel and features individual regulation and short circuit protection for each channel, very low noise and crosstalk and isolated outputs which protect other equipment. Includes PS-1 Power Supply. |
 |
PS-1 24v: AC 450ma Power Supply 1 lbs (.45 kg) |
 |
RMK-100: PA Series - Single Rack-Mount Kit 1 lbs (.45 kg)
This kit allows you to rackmount one PA-50B or PA-100B amplifier in a single rack-space (1U).
|
 |
RMK-200: PA Series - Double Rack-Mount Kit 1 lbs (.45 kg)
This kit allows you to rackmount two PA-50B or PA-100B amplifiers in a single rack-space (1U). |
 |
RMK-70-S: DA-70 SERIES Single Rack-Mount Kit 1 lbs (.45 kg)
This kit allows you to rackmount one DA-70-2, DA-70-4, or DA-770 amplifier in a single rack-space (1U). |
 |
RMK-70-D: DA-70 SERIES Double Rack-Mount Kit
This kit allows you to rackmount two DA-70-2, DA-70-4, or DA-770 amplifiers in a single rack-space (1U). |
|
RMK-50: AV50 Single Rack Mount Kit
This kit allows you to rackmount one AV-50 amplifier in a single rack-space (1U). |
 |
AV-Pole: AV50 Pole Mount Strap
This kit allows you to pole-mount one AV-50 amplifier. |
| |
