AV30MX-2
2 Channel Stereo Mixer Amplifier - 30W x 2 @ 8Ω
2 channel stereo mixer amplifier in a subcompact, 1/4 rack form factor. This amplifier is plenum rated for above-ceiling applications and uses our Signal Sense Technology for Energy Star compliance.
CVA50MX-1
4 Channel Mixer Amplifier - 50W x 1
With its variety of inputs and the ability to output into either a 4/8 Ohm setup or a constant voltage distributed speaker setup, the CVA50MX-1 is an all-in-one solution for any application.
DSP100-1-CV-D
Mono DSP-Enabled Amplifier
1 x 100W @ 70V/100V
Dante™ Network Enabled
The DSP100-1-CV-D is an affordable, single channel, 70V/100V, 1/2 rack amplifier delivering 100W audio power, with built in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-1-CV-D supports Dante™ audio.
DSP100-2-CV-D
2 Channel DSP-Enabled Amplifier
2 x 100W @ 70V/100V
Dante™ Network Enabled
The DSP100-2-CV-D is an affordable, 2 channel, 70V/100V, 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-2-CV-D supports Dante™ audio.
CVA50PMX-1
4 Channel Mixer Paging Amplifier - 50W x 1
With its variety of inputs and the ability to output into either a 4/8 Ohm setup or a constant voltage distributed speaker setup, the CVA50PMX-1 is an all-in-one solution for any application.
DSP100-2-LZ-D
2 Channel DSP-Enabled Amplifier
2 x 100W @ 4/8 Ohms
Dante™ Network Enabled
The DSP100-2-LZ-D is an affordable, 2 channel, 4/8 Ohm, 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-2-LZ-D supports Dante™ audio.
DSP100-1-CV
Mono DSP-Enabled Amplifier
1 x 100W @ 70V/100V
The DSP100-1-CV is an affordable, single channel, 70V/100V, 1/2 rack amplifier delivering 100W audio power, with built in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications.
DSP100-2-CV
2 Channel DSP-Enabled Amplifier
2 x 100W @ 70V/100V
The DSP100-2-CV is an affordable, 2 channel, 70V/100V, 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications.
DSP100-2-LZ
2 Channel DSP-Enabled Amplifier
2 x 100W @ 4/8 Ohms
The DSP100-2-LZ is an affordable, 2 channel, 4/8 Ohm, 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications.
FLX-E-80-4-LZ
4 Channel DSP-Enabled Amplifier
4 x 80/40W @ 4/8Ω
The FLX-E-80-4-LZ is a 4 channel, 4/8Ω, 1/2 rack amplifier delivering 80/40W per channel into 4/8Ω with built in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control.
FLX-E-80-4-LZ-D
4 Channel DSP-Enabled Amplifier
4 x 80/40W @ 4/8Ω
Dante™ Network Enabled
The FLX-E-80-4-LZ-D is a 4 channel, 4/8Ω, 1/2 rack amplifier delivering 80/40W per channel into 4/8Ω with built in DSP, Ethernet control & reporting, secondary RS-232 control and remote volume control. The FLX-E-80-4-LZ-D amplifier supports Dante™ audio.
FLX-E-80-4-CV
4 Channel DSP-Enabled Amplifier
4 x 80W @ 70/100V
The FLX-E-80-4-CV is a 4 channel, 70V/100V, 1/2 rack amplifier delivering 80W per channel with built in DSP, Ethernet control & reporting, secondary RS-232 control and remote volume control.
FLX-E-80-4-CV-D
4 Channel DSP-Enabled Amplifier
4 x 80W @ 70/100V
Dante™ Network Enabled
The FLX-E-80-4-CV-D is a 4 channel, 70V/100V, 1/2 rack amplifier delivering 80W per channel with built in DSP, Ethernet control & reporting, secondary RS-232 control and remote volume control. The FLX-E-80-4-CV-D amplifier supports Dante™ audio.
FLX-E-160-2-LZ
2 Channel DSP-Enabled Amplifier
2 x 160W @ 4/8Ω
The FLX-E-160-2-LZ is a 2 channel, 4/8Ω, 1/2 rack amplifier delivering 160W per channel with built in DSP, Ethernet control & reporting, secondary RS-232 control and remote volume control.
FLX-E-160-2-LZ-D
2 Channel DSP-Enabled Amplifier
2 x 160W @ 4/8Ω
Dante™ Network Enabled
The FLX-E-160-2-LZ-D is a 2 channel, 4/8Ω, 1/2 rack amplifier delivering 160W per channel with built in DSP, Ethernet control & reporting, secondary RS-232 control and remote volume control. The FLX-E-160-2-LZ-D amplifier supports Dante™ audio.
FLX-E-160-2-CV
2 Channel DSP-Enabled Amplifier
2 x 160W @ 70/100V
The FLX-E-160-2-CV is a 2 channel, 70V/100V, 1/2 rack amplifier delivering 160W per channel with built in DSP, Ethernet control & reporting, secondary RS-232 control and remote volume control.
FLX-E-160-2-CV-D
2 Channel DSP-Enabled Amplifier
2 x 160W @ 70/100V
Dante™ Network Enabled
The FLX-E-160-2_CV-D is a 2 channel, 70V/100V, 1/2 rack amplifier delivering 160W per channel with built in DSP, Ethernet control & reporting, secondary RS-232 control and remote volume control. The FLX-E-160-2-CV-D amplifier supports Dante™ audio.
FLX-E-320-1-CV
Mono DSP-Enabled Amplifier
1 x 320W @ 70/100V
The FLX-E-320-1-CV is a single channel, 70V/100V, 1/2 rack amplifier delivering 320W audio power with built in DSP, Ethernet control & reporting, secondary RS-232 control and remote volume control. The FLX-E-320-1-CV-D amplifier supports Dante™ audio.
FLX-E-320-1-CV-D
Mono DSP-Enabled Amplifier
1 x 320W @ 70/100V
Dante™ Network Enabled
The FLX-E-320-1-CV-D is a single channel, 70V/100V, 1/2 rack amplifier delivering 320W audio power with built in DSP, Ethernet control & reporting, secondary RS-232 control and remote volume control. The FLX-E-320-1-CV-D amplifier supports Dante™ audio.
