Stewart Audio
Showing products 1 - 20 of 20.
CVA25-1

CVA25-1

Mono Sub Compact Amplifier - 25W x 1 @ 70V/100V

With an extremely compact form factor, the CVA's allow amplification to be located in places normally off limits to standard amplifiers without compromising sound or power.

CVA50-1

CVA50-1

Mono Sub Compact Amplifier - 50W x 1 @ 70V/100V

With an extremely compact form factor, the CVA's allow amplification to be located in places normally off limits to standard amplifiers without compromising sound or

CVA50MX-1

CVA50MX-1

4 Channel Mixer Amplifier - 50W x 1

With its variety of inputs and the ability to output into either a 4/8 Ohm setup or a constant voltage distributed speaker setup, the CVA50MX-1 is an all-in-one solution for any application.

FLX320-1-CV

FLX320-1-CV

Mono DSP-Enabled Amplifier
1 x 320W @ 70/100V

The FLX320-1-CV is a single channel, 70V/100V, 1/2 rack amplifier delivering 320W audio power with built in DSP, RS232 control and remote volume control.

CVA50PMX-1

CVA50PMX-1

4 Channel Mixer Paging Amplifier - 50W x 1

With its variety of inputs and the ability to output into either a 4/8 Ohm setup or a constant voltage distributed speaker setup, the CVA50PMX-1 is an all-in-one solution for any application.

CVA50-1 NET+

CVA50-1 NET+

Mono Dante™
Subcompact Amplifier - 50W x 1 @ 70V/100V

Mono constant voltage Dante™ networked amplifier in a subcompact, 1/3 rack form factor. Includes both local and network inputs with priority switching.

CVA50-1 NET

CVA50-1 NET

Mono Dante™
Subcompact Amplifier - 50W x 1 @ 70V/100V

Mono constant voltage networked amplifier in a subcompact, 1/3 rack form factor.

CVA50-1 Priority PA

CVA50-1 Priority PA

*DISCONTINUED* Mono Amplifier with 25V Input - 50W x 1 @ 70V

The CVA50-1 Priority-PA has been discontinued.
Mono constant voltage amplifier with a 25V in a subcompact, 1/3 rack form factor. Includes both local and PA inputs with ducking of local input.

FLX80-4-CV-D

FLX80-4-CV-D

4 Channel DSP-Enabled Amplifier
4 x 80W @ 70/100V
Dante™ Network Enabled

The FLX80-4-CV-D is a 4 channel, 70V/100V, 1/2 rack amplifier delivering 80W per channel with built in DSP, RS232 control and remote volume control. The FLX80-4-CV-D amplifier supports Dante™ audio.

FLX160-2-CV-D

FLX160-2-CV-D

2 Channel DSP-Enabled Amplifier
2 x 160W @ 70/100V
Dante™ Network Enabled

The FLX160-2_CV-D is a 2 channel, 70V/100V, 1/2 rack amplifier delivering 160W per channel with built in DSP, RS232 control and remote volume control. The FLX160-2-CV-D amplifier supports Dante™ audio.

FLX320-1-CV-D

FLX320-1-CV-D

Mono DSP-Enabled Amplifier
1 x 320W @ 70/100V
Dante™ Network Enabled

The FLX320-1-CV-D is a single channel, 70V/100V, 1/2 rack amplifier delivering 320W audio power with built in DSP, RS232 control and remote volume control. The FLX320-1-CV-D amplifier supports Dante™ audio.

DSP100-1-CV-D

DSP100-1-CV-D

Mono DSP-Enabled Amplifier
1 x 100W @ 70V/100V
Dante™ Network Enabled

The DSP100-1-CV-D is an affordable, single channel, 70V/100V, 1/2 rack amplifier delivering 100W audio power, with built in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-1-CV-D supports Dante™ audio.

DSP100-2-CV-D

DSP100-2-CV-D

2 Channel DSP-Enabled Amplifier
2 x 100W @ 70V/100V
Dante™ Network Enabled

The DSP100-2-CV-D is an affordable, 2 channel, 70V/100V, 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-2-CV-D supports Dante™ audio.

CVA25-1 25V

CVA25-1 25V

Mono Sub Compact Amplifier - 50W x 1 @ 25V

With an extremely compact form factor, the CVA25-1 25V allows amplification to be located in places normally off limits to standard amplifiers without compromising sound or power.

FLX160-2-CV

FLX160-2-CV

2 Channel DSP-Enabled Amplifier
2 x 160W @ 70/100V

The FLX160-2-CV is a 2 channel, 70V/100V, 1/2 rack amplifier delivering 160W per channel with built in DSP, RS232 control and remote volume control.

FLX80-4-CV

FLX80-4-CV

4 Channel DSP-Enabled Amplifier
4 x 80W @ 70/100V

The FLX80-4-CV is a 4 channel, 70V/100V, 1/2 rack amplifier delivering 80W per channel with built in DSP, RS232 control and remote volume control.

FLX80-4-LZ

FLX80-4-LZ

4 Channel DSP-Enabled Amplifier
4 x 80W @ 4Ω

The FL80-4-LZ is a 4 channel, 4/8 Ohm, 1/2 rack amplifier delivering 80W per channel with built in DSP, RS232 control and remote volume control.

DSP100-1-CV

DSP100-1-CV

Mono DSP-Enabled Amplifier
1 x 100W @ 70V/100V

The DSP100-1-CV is an affordable, single channel, 70V/100V, 1/2 rack amplifier delivering 100W audio power, with built in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications.

DSP100-2-CV

DSP100-2-CV

2 Channel DSP-Enabled Amplifier
2 x 100W @ 70V/100V

The DSP100-2-CV is an affordable, 2 channel, 70V/100V, 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications.

CVA16-1-CV-D

CVA16-1-CV-D

Single-Channel Dante™ Subcompact PoE+ Amplifier
16W x 1 @ 70V/100V

The CVA16-1-CV-D is a single channel PoE+ (30W port power) Dante™ amplifier in a plenum rated compact, flange mount enclosure.