u Stewart Audio - AV25-2 NET+
Stewart Audio

AV25-2 NET+

*Discontinued* 2 Channel Dante™
Subcompact Amplifier - 25W x 2 @ 8Ω

The AV25-2 Net+ has been discontinued.
2 channel Dante™ amplifier in a subcompact, 1/3 rack form factor. Includes both local and network inputs with priority switching.

  • • Two Dante™ channels with local inputs
  • • Priority switching between signals
  • • Remote volume control (local inputs only)
  • • Mute contact closure
  • • External inline power supply
AV25-2 NET+
Front Image | Back Image (Click Image to Zoom)
The AV25-2 NET and NET+ are subcompact 35/25W x 2 at 4/8 ohms networkable power amplifiers built to meet the rigorous demands of high quality commercial, industrial and Pro Audio sound installations. The AV25-2 Net version is designed with a network only signal input, while the NET+ version has both Network and local legacy inputs. A priority switch on the rear allows for selective ducking of either signal to allow one amplifier to do the work of two. These versatile dual input amplifiers allow for legacy audio devices to be used in a local setting while still having the flexibility of utilizing a networked signal. By setting the priority to local, the network could play background music until a signal is detected on the local inputs from a TV in a lobby. If the priority is set to network, a page could duck the TV output in a training room. These lightweight Class D amplifiers straddle the digital divide using all the benefits of the networked audio and while allowing for legacy device use.

4 Ohm Power 35W / channel
8 Ohm Power 25W / channel
Frequency Response (+0, -3 dB, 1W) 30 Hz - 20 kHz
THD+N <0.1% @ Full Power
Signal to noise ratio >100dB
Remote Volume Control 0-10VDC, 4 Pin Euro Block (local inputs only)
External Mute Contact closure
Input Sensitivity .5V (-6 dBV)
Standard Voltage Gain 28X (26.5dB)
Input impedance (Balanced/Unbalanced) 20k Ohms/10k Ohms
Standby, Idle Current Draw , 1/8 power draw 3.3 / 6.9 / 14.2 Watts
Class D
Input Connectors RJ45, Euro Block
Output Connectors Euro Block, line out
Power Supply External in-line 48VDC (Included)
Cooling Convection-Cooling (No Fans)
Controls Level (local inputs only)
LED Indicators Power, Signal Present & Clip
Construction Aluminum Chassis
Dimensions (height, width, depth) 1.25"H x 6.00"W x 4.00"D (3.2H x 15.2W x 10.2D cm)
Weight <.57 lbs (0.26 kg)
Warranty 3 years
Plenum Rating UL 2043 Approved

Product Datasheet PDF
User Manual PDF