With its variety of inputs and the ability to output into either a 4/8 Ohm setup or a constant voltage distributed speaker setup, the CVA50PMX-1 is an all-in-one solution for any application.
4 Ohm/8 Ohm Power | 25W x 2 |
25V/70V/100V Power | 50W x 1 |
Frequency Response (+0, -3 dB) | 100Hz - 20kHz |
Power Bandwidth (+3, -3dB) | 80Hz - 30kHz |
THD+N | <.1% @ Full Power |
Signal to Noise Ratio | >90dB |
Remote Volume Control | 0-10VDC |
External Mute | Contact Closure |
Ducking | 0 to -90dB (Adjustable) |
Phantom Power | +48VDC (Switchable) |
Input Sensitivity of Mic Input | 0dB (1V) or -30dB (30mV), Selectable |
Input Sensitivity of Inputs 2-4 | 0dB (1V) |
Standard Voltage Gain | 40x (32dB) |
Input Impedance | 10k Ohms |
Standby, Idle Current Draw, 1/8 Power Draw | .005/.01/.15A |
Class | D |
Input Connectors | Mic (3-pin Euroblock), RCA, 3.5mm, 3-pin Euroblock |
Output Connectors | Euroblock |
Power Supply | External in-line 48VDC (Included) |
Cooling | Convection-cooling (No fans) |
Controls | 4 level controls, 1 Master Level, Ducking |
LED Indicators | Power, Signal Present, & Clip |
Construction | Aluminum Chassis |
Dimensions (H,W,D) | 1.4"H x 6.2"W x 4"D |
Weight | 1.2lbs |
Warranty | 3 Years |
Plenum Rating | UL 2043 Pending |