DA70-2
*DISCONTINUED* 2 Channel Digital Amplifier - 35W x 2 @ 8Ω
The DA70-2 has been discontinued.
2 channel all-digital power amplifier delivering over 70 watts per channel in just a half-rack space.
- • Ultra Efficient All Digital Design
- • Switch Mode Power Supply
- • Convection Cooled (No Fans)
- • Very Low Power Consumption
- • Multi-Channel Compact Half Rack Package
The DA-70 Series Professional Series Power Amplifier utilizes a high speed switching power supply and Damped Ternary Modulation Digital output topology. The amplifier will deliver over 70 Watts of power per channel and may be purchased in either a 2 or 4 channel configuration. This remarkable performance comes in a very compact package weighing a mere 3.0 lbs and occupying just one-half standard rack space. The DA-70-2 Series Amplifiers are convection cooled making them extremely quiet so the only sound you will hear are the ones you produce. The all-digital Compact Series was specifically designed to meet the rigorous requirements of Sonic Accuracy, High Efficiency, Low power consumption and extended duty cycles in a very compact half rack package.
| 8 Ohm Stereo Power | 35W x 2 |
| 4 Ohm Stereo Power | 70W x 2 |
| Frequency Response (+0, -0.5dB, 1W) | 20Hz - 20kHZ |
| Full Power Bandwidth (+/.5 dB) | 20Hz - 20kHz |
| Signal to Noise Ratio | >85dB |
| THD+N | <.1% |
| Input Sensitivity | 1V (0 dBV) |
| Standard Voltage Gain | 17x (25dB) |
| Input Impedance (Balanced/Unbalanced) | 10k Ohms/5k Ohms |
| Idle Current Draw, 1/8 Power Draw | 0.08, 0.25A |
| Class | Damped Ternary Modulation |
| Input Connectors | Phoenix Type |
| Output Connectors | Phoenix Type |
| Power Supply | High-speed Switching |
| Cooling | Convection-Cooled (No fans) |
| Controls | Power, Channel Gain |
| LED Indicators | Power & Clip |
| Construction | Steel & Aluminum Chassis |
| Operating Voltage | 120VAC |
| Dimensions (H,W,D) | 1.75"H x 8.26"W x 10.6"D |
| Weight | 3.0lbs (1.36kg) |
| Warranty | 3 years |
RMK-70-S
This kit allows you to rack mount one CVA100 amplifier in a single rack-space (1U).
RMK-70-D
This kit allows you to rack mount two CVA100 amplifiers in a single rack-space (1U).
LITERATURE
| Product Datasheet | |
| Operations Manual |
Registration is no longer required for full access to downloads.
VISIO STENCILS
| Faceplate Options Stencil Library - Visio Editable | Register Now |
